Matrix Location: 1-F
Course: Environmental Engineering
Topic: Air Sampling and Analysis
  Modules
    None available at this time.
  Case Studies
    Reference 10, Subpart C: Case Study: “Indoor Air Pollution Migration Transport Mechanisms in High-Rise Buildings.” Indoor air pollution in a high-rise building is the discussed topic in this case study. Air engineering methods to prevent or inhibit the air problem are examined. Reference to Hard Copy (Case Study Packet)
  Other Resources
    None available at this time.

Matrix Location: 1-M
Course: Fluids
Topic: Air Sampling and Analysis
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 27, Subpart B: Air Sampling. Reference to Hard Copy (Workbook)

Matrix Location: 2-B
Course: Statics
Topic: Anthropometry
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
   

Reference 33, Subpart A: Human Systems Design and Modeling. Reference to Hard Copy (Book)
Reference 33, Subpart B: Biostatics Mechanics. Reference to Hard Copy (Book)


Matrix Location: 2-C
Course: Dynamics
Topic: Anthropometry
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
   

Reference 33, Subpart C: Biodynamic Mechanics. Reference to Hard Copy (Book)


Matrix Location: 2-E
Course: Thermodynamics/Heat Transfer
Topic: Anthropometry
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 33, Subpart E: Biothermodynamics and Bioenergetics. Reference to Hard Copy (Book)

Matrix Location: 2-O
Course: Other
Topic: Anthropometry
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 33, Subpart D: Bioelectricity and Bioelectronics. Reference to Hard Copy (Book)
Reference 33, Subpart F:
Ergonomic Biodynamics. Reference to Hard Copy (Book)
Reference 33, Subpart G:
Quantitative Workload Analysis. Reference to Hard Copy (Book)
Reference 33, Subpart H:
Neuromuscular Control Systems. Reference to Hard Copy (Book)

Matrix Location: 3-A
Course: Introduction to Civil Engineering
Topic: Chemical Mixing
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 27, Subpart A: Industrial Hygiene and Chemistry. Reference to Hard Copy (Workbook)

Matrix Location: 3-D
Course: Strength of Materials
Topic: Chemical Mixing
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart B: General Laboratory Safety Rules. Reference to Hard Copy (Book)
Reference 11, Subpart A: Example Problems: Unit III sample quiz questions. These five questions are designed to emphasize the reading regarding safety procedures and programs. Reference to Hard Copy (Module)

Matrix Location: 3-E
Course: Thermodynamics/Heat Transfer
Topic: Chemical Mixing
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart B: General Laboratory Safety Rules. Reference to Hard Copy (Book)
Reference 11, Subpart A: Example Problems: Unit III sample quiz questions. These five questions are designed to emphasize the reading regarding safety procedures and programs. Reference to Hard Copy (Module)

Matrix Location: 3-J
Course: Structural Analysis
Topic: Chemical Mixing
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart B: General Laboratory Safety Rules. Reference to Hard Copy (Book)

Matrix Location: 3-N
Course: Seminar
Topic: Chemical Mixing
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 27, Subpart A: Industrial Hygiene and Chemistry. Reference to Hard Copy (Workbook)

Matrix Location: 4-A
Course: Introduction to Civil Engineering
Topic: Codes and Standards
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 11, Subpart D: Example Problems: Unit IV sample quiz questions. Seven questions are located at the end of the unit covering safety and health standards and regulations. Reference to Hard Copy (Module)

Matrix Location: 4-D
Course: Strength of Materials
Topic: Codes and Standards
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart D: Safety and Health Standards and Regulations. Reference to Hard Copy (Book)

Matrix Location: 4-E
Course: Thermodynamics/Heat Transfer
Topic: Codes and Standards
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart D: Safety and Health Standards and Regulations. Reference to Hard Copy (Book)

Matrix Location: 4-I
Course: Hydrology
Topic: Codes and Standards
  Modules
    None available at this time.
  Case Studies
    Reference 32, Subpart A: Case Studies in Wellhead Protection: Ten Examples of Innovative Wellhead Protection Programs. Reference to Web Page
Reference 32, Subpart B:
TDML Case Study: Denver Metro, South Platte River Segment. Reference to Web Page
Reference 32, Subpart C:
TDML Case Study: South Fork of the Salmon River. Reference to Web Page
Reference 32, Subpart D:
TDML Case Study: West Fork of Clear Creek. Reference to Web Page
Reference 32, Subpart E:
TDML Case Study: Nomini Creek Watershed. Reference to Web Page
Reference 32, Subpart G:
TDML Case Study: The Lower Minnesota River. Reference to Web Page
Reference 32, Subpart H:
TDML Case Study: Sycamore Creek, Michigan. Reference to Web Page
Reference 32, Subpart I:
TDML Case Study: Boulder Creek, Colorado. Reference to Web Page
Reference 32, Subpart J:
TDML Case Study: Appoquinimink River, Delaware. Reference to Web Page
Reference 32, Subpart K:
TDML Case Study: Tar-Pamlico Basin, North Carolina. Reference to Web Page
Reference 32, Subpart L:
TDML Case Study: Lake Chelan, Washington. Reference to Web Page
Reference 32, Subpart M:
TDML Case Study: Modeling the Appoqiunimink River. Reference to Web Page
Reference 32, Subpart N:
TDML Case Study: Truckee River, Nevada. Reference to Web Page
Reference 32, Subpart O:
Case Study - Methyl Bromide Alternative: Weyerhaeuser: Integrated Approaches to Developing Alternatives to Methyl Bromide. Reference to Web Page
Reference 32, Subpart P:
Case Study - Methyl Bromide Alternative: Temperature Control for Stored Product Insects at Pillsbury. Reference to Web Page
Reference 32, Subpart Q:
Case Study - Methyl Bromide Alternative: Structural Fumigation Using a Combined Treatment of Phosphine, Heat, and Carbon Dioxide. Reference to Web Page
Reference 32, Subpart R:
Case Study - Methyl Bromide Alternative: Basamid for the Forest Nursery Industry. Reference to Web Page
Reference 32, Subpart S:
A Case Study of Environmental, Health, and Safety Issues Involving the Burlington, Massachussets Public School System: Underground Storage Tanks. Reference to Web Page
Reference 32, Subpart T:
A Case Study of Environmental, Health, and Safety Issues Involving the Burlington, Massachussets Public School System: Spill and Emergency Response Plans. Reference to Web Page
Reference 32, Subpart Z:
A Case Study of Environmental, Health, and Safety Issues Involving the Burlington, Massachussets Public School System: Sanitary Drains. Reference to Web Page
Reference 32, Subpart AA:
Guidance on Storm Water Drainage Wells: Interim Final. Reference to Web Page
  Other Resources
    None available at this time.

Matrix Location: 4-J
Course: Structural Analysis
Topic: Codes and Standards
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
   

Reference 3, Subpart D: Safety and Health Standards and Regulations. Reference to Hard Copy (Book)
Reference 8, Subpart D: Example Peoblems: Unit 3 Review Questions. Eight questions test comprehension on OSHA, NIOSH, and other related projects in safety and health. Reference to Hard Copy (Book)
Reference 8, Subpart K: NIOSH Alert Case Study: "Request for Assistance in Preventing Fatalities of Workers Who Contact Electrical Energy." A background, appropriate standards and guidelines, and two case reports are given for the problem. Reference to Hard Copy (Book)
Reference 8, Subpart L: NIOSH Alert Case Study: "Request for Assistance in Preventing Electrocutions of Workers Using Portable Metal Ladders Near Overhead Power Lines." A background, four case reports and recommendations are presented for the problem. Reference to Hard Copy (Book)
Reference 8, Subpart M: NIOSH Alert Case Study: Request for Assistance in Preventing Worker Deaths and Injuries from Falls Through Sky Lights and Roof Openings." A background, regulations, eight case reports, and recommendations are presented for the problem. Reference to Hard Copy (Book)
Reference 8, Subpart N: NIOSH Alert Case Study: "Request for Assistance in Preventing Electrocutions During Work with Scaffolds Near Overhead Power Lines." A background, current OSHA regulations, six case reports, and recommendations are given for the problem. Reference to Hard Copy (Book)
Reference 8, Subpart O: NIOSH Alert Case Study: "Request for Assistance in Preventing Lead Poisoning in Construction Workers." A background, health effects of lead exposure, exposure criteria and regulations, six case reports, conclusions, and recommendations are presented. Reference to Hard Copy (Book)
Reference 8, Subpart P: NIOSH Alert Case Study: "Request for Assistance in Preventing Worker Injuries and Deaths Caused by Falls from Suspension Scaffolds." A background, current and proposed OSHA regulations, five case reports, conclusions, and recommendations are presented. Reference to Hard Copy (Book)


Matrix Location: 4-N
Course: Seminar
Topic: Codes and Standards
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart D: Safety and Health Standards and Regulations. Reference to Hard Copy (Book)
Reference 14, Subpart D: Example problems: “Unit IV sample quiz questions.” Standards, codes, and the organizations that create these standards are the focus of this set of questions. Engineering ethics is also touched upon. Reference to Hard Copy (Book)
Reference 22, Subpart G: Laws, Codes, and Regulations. Reference to Hard Copy (Workbook)

Matrix Location: 6-J
Course: Structural Analysis
Topic: Confined Space
  Modules
    None available at this time.
  Case Studies
    Reference 8, Subpart K: NIOSH Alert Case Study: “Request for Assistance in Preventing Fatalities of Workers Who Contact Electrical Energy.” A background, appropriate standards and guidelines, and two case reports are given for the problem. Reference to Hard Copy (Book)
  Other Resources
    None available at this time.

Matrix Location: 6-O
Course: Other
Topic: Confined Space
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 18, Subpart F: Fatalities during confined space entry. Fatal Fact Number: 25, 36, 39. Reference to Web Page

Matrix Location: 7-A
Course: Introduction to Civil Engineering
Topic: Construction Safety
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 8, Subpart B: Example problems: Unit 2 Review Questions. Three questions test for comprehension on construction industry safety and health concerns. Reference to Hard Copy (Book)
Reference 8, Subpart F: Example problems: Unit 5 Review Questions. Thirty-eight questions testing comprehension of hazards related to construction are presented. Reference to Hard Copy (Book)

Matrix Location: 7-B
Course: Statics
Topic: Construction Safety
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 18, Subpart J: Fatalities due to slips and falls in construction/demolition. Reference to Web Page (Fatal Facts)

Matrix Location: 7-C
Course: Dynamics
Topic: Construction Safety
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 18, Subpart J: Fatalities due to slips and falls in construction/demolition. Reference to Web Page (Fatal Facts)

Matrix Location: 7-D
Course: Strength of Materials
Topic: Construction Safety
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 18, Subpart G: Fatalities due to poor selection of materials. Reference to Web Page (Fatal Facts)

Matrix Location: 7-G
Course: Geotechnical Engineering
Topic: Construction Safety
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 1, Subpart L: Example problem: Excavation Sideslopes. The steepest allowable sideslope for an excavation in silty clay was calculated. Reference to Hard Copy (Article)
Reference 1, Subpart M: Example problem: Lateral Soil Pressure. A continuation of the excavation sideslope problem, the lateral soil pressure was determined for a shoring or shielding system. Reference to Hard Copy (Article)

Matrix Location: 7-J
Course: Structural Analysis
Topic: Construction Safety
  Modules
    None available at this time.
  Case Studies
    Reference 8, Subpart O: NIOSH Alert Case Study: “Request for Assistance in Preventing Lead Poisoning in Construction Workers.” A background, health effects of lead exposure, exposure criteria and regulations, six case reports, conclusions, and recommendations are presented. Reference to Hard Copy (Book)
  Other Resources
    Reference 8, Subpart A: Example problems: Unit 1 Review Questions. Five questions are presented to emphasize the material presented in this unit, including basic construction safety issues. Reference to Hard Copy (Book)
Reference 8, Subpart B: Example problems: Unit 2 Review Questions. Three questions test for comprehension on construction industry safety and health concerns. Reference to Hard Copy (Book)
Reference 8, Subpart F: Example problems: Unit 5 Review Questions. Thirty-eight questions testing comprehension of hazards related to construction are presented. Reference to Hard Copy (Book)
Reference 8, Subpart G: Example problems: Unit 6 Review Questions. Fifteen questions about construction industry failures, constructability, and their relation to safety are given. Reference to Hard Copy (Book)
Reference 8, Subpart H: Example problems: Unit 7 Review Questions. Fourteen questions relating to job-site safety and those responsible for administering such programs are presented. Reference to Hard Copy (Book)

Matrix Location: 7-N
Course: Seminar
Topic: Construction Safety
  Modules
    None avaiable at this time.
  Case Studies
    None avaiable at this time.
  Other Resources
    Reference 8, Subpart H: Example problems: Unit 7 Review Questions. Fourteen questions relating to job-site safety and those responsible for administering such programs are presented. Reference to Hard Copy (Book)
Reference 18, Subpart E: Fatalities during excavation. Reference to Web Page (Fatal Facts)

Matrix Location: 7-O
Course: Other
Topic: Construction Safety
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 18, Subpart A: Electrocutions during construction. Reference to Web Page (Fatal Facts)
Reference 18, Subpart E: Fatalities during excavation. Reference to Web Page (Fatal Facts)

Matrix Location: 8-M
Course: Design
Topic: Control/Display Design
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 30, Subpart A: The Typewriter: A Case History in the Evolution of Design. Reference to Hard Copy (Book)
Reference 30, Subpart B: The Faucet: A Case History of Design Difficulties. Reference to Hard Copy (Book)

Matrix Location: 11-A
Course: Introduction to Civil Engineering
Topic: Electrical Hazards
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 8, Subpart A: Example problems: Unit 1 Review Questions. Five questions are presented to emphasize the material presented in this unit, including basic construction safety issues. Reference to Hard Copy (Book)
Reference 8, Subpart B: Example problems: Unit 2 Review Questions. Three questions test for comprehension on construction industry safety and health concerns. Reference to Hard Copy (Book)
Reference 18, Subpart C: Electrocutions during Power Line work. Reference to Web Page (Fatal Facts)

Matrix Location: 11-J
Course: Structural Analysis
Topic: Electrical Hazards
  Modules
    None available at this time.
  Case Studies
    Reference 8, Subpart I: NIOSH Alert Case Study: “Request for Assistance in Preventing Electrocutions from Contact Between Cranes and Power Lines.” A background to the problem and five case reports are presented, as well as recommended work practices. Reference to Hard Copy (Book)
Reference 8, Subpart K: NIOSH Alert Case Study: “Request for Assistance in Preventing Fatalities of Workers Who Contact Electrical Energy.” A background, appropriate standards and guidelines, and two case reports are given for the problem. Reference to Hard Copy (Book)
Reference 8, Subpart L: NIOSH Alert Case Study: “Request for Assistance in Preventing Electrocutions of Workers Using Portable Metal Ladders Near Overhead Power Lines.” A background, regulations, four case reports and recommendations are presented for the problem. Reference to Hard Copy (Book)
Reference 8, Subpart N: NIOSH Alert Case Study: “Request for Assistance in Preventing Electrocutions During Work with Scaffolds Near Overhead Power Lines.” A background, current OSHA regulations, six case reports, and recommendations are given for the problem. Reference to Hard Copy (Book)
  Other Resources
    None available at this time.

Matrix Location: 11-O
Course: Other
Topic: Electrical Hazards
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 18, Subpart A: Electrocutions during construction. Reference to Web Page (Fatal Facts)
Reference 18, Subpart B: Electrocutions during Ground Core sampling. Reference to Web Page (Fatal Facts)
Reference 18, Subpart C: Electrocutions during Power Line work. Reference to Web Page (Fatal Facts)
Reference 18, Subpart D: Electrocutions during Electrical Maintenance. Reference to Web Page (Fatal Facts)

Matrix Location: 12-F
Course: Environmental Engineering
Topic: Environmental Topics
  Modules
    None available at this time.
  Case Studies
    Reference 32, Subpart A: Case Studies in Wellhead Protection: Ten Examples of Innovative Wellhead Protection. Reference to Web Page
Reference 32, Subpart B: TMDL Case Study: Denver Metro The South Platte River Segment. Reference to Web Page
Reference 32, Subpart C: TMDL Case Study: South Fork of the Salmon River. Reference to Web Page
Reference 32, Subpart D: TMDL Case Study: West Fork of Clear Creek. Reference to Web Page
Reference 32, Subpart E: TMDL Case Study: Nomini Creek Watershed. Reference to Web Page
Reference 32, Subpart F: TMDL Case Study: Albermarle/Pamlico Estuary. Reference to Web Page
Reference 32, Subpart G: TMDL Case Study: The Lower Minnesota River. Reference to Web Page
Reference 32, Subpart H: TMDL Case Study: Sycamore Creek, Michigan. Reference to Web Page
Reference 32, Subpart I: TMDL Case Study: Boulder Creek, Colorado. Reference to Web Page
Reference 32, Subpart J: TMDL Case Study: Appoquinimink River, Delaware. Reference to Web Page
Reference 32, Subpart K: TMDL Case Study: Tar-Pamlico Basin, North Carolina. Reference to Web Page
Reference 32, Subpart L: TMDL Case Study: Lake Chelan, Washington. Reference to Web Page
Reference 32, Subpart M: TMDL Case Study: Modeling the Appoquinimink River. Reference to Web Page
Reference 32, Subpart N: TMDL Case Study: Truckee River, Nevada. Reference to Web Page
Reference 32, Subpart O: Case Study – Methyl Bromide Alternative: Weyerhaeuser: Integrated Approaches to Developing Alternatives to Methyl Bromide. Reference to Web Page
Reference 32, Subpart P: Case Study – Methyl Bromide Alternative: Temperature Control for Stored Product Insects at Pillsbury. Reference to Web Page
Reference 32, Subpart Q: Case Study – Methyl Bromide Alternative: Structural Fumigation Using a Combined Treatment of Phosphine, Heat, and Carbon Dioxide. Reference to Web Page
Reference 32, Subpart R: Case Study – Methyl Bromide Alternative: Basamid for the Forest Nursery Industry. Reference to Web Page
Reference 32, Subpart S: A Case Study of Environmental, Health and Safety Issues Involving the Burlington, Massachusetts Public School System: Underground Storage Tanks. Reference to Web Page
Reference 32, Subpart T: A Case Study of Environmental, Health and Safety Issues Involving the Burlington, Massachusetts Public School System: Spill and Emergency Response Plans. Reference to Web Page
Reference 32, Subpart U: A Case Study of Environmental, Health and Safety Issues Involving the Burlington, Massachusetts Public School System: Radioactive Materials. Reference to Web Page
Reference 32, Subpart V: A Case Study of Environmental, Health and Safety Issues Involving the Burlington, Massachusetts Public School System: Lasers. Reference to Web Page
Reference 32, Subpart W: A Case Study of Environmental, Health and Safety Issues Involving the Burlington, Massachusetts Public School System: Mercury Management. Reference to Web Page
Reference 32, Subpart X: A Case Study of Environmental, Health and Safety Issues Involving the Burlington, Massachusetts Public School System: Asbestos Management. Reference to Web Page
Reference 32, Subpart Y: A Case Study of Environmental, Health and Safety Issues Involving the Burlington, Massachusetts Public School System: Radon. Reference to Web Page
Reference 32, Subpart Z: A Case Study of Environmental, Health and Safety Issues Involving the Burlington, Massachusetts Public School System: Sanitary Drains. Reference to Web Page
Reference 32, Subpart AA: Guidance on Storm Water Drainage Wells: Interim Final. Reference to Web Page
Reference 32, Subpart BB: Landfill Methane Outreach Program: Case Studies: St. John’s Landfill Gas Project. Reference to Web Page
Reference 32, Subpart CC: Landfill Methane Outreach Program: Case Studies: Fuel Cells. Reference to Web Page
Reference 32, Subpart DD: Landfill Methane Outreach Program: Case Studies: DTE Biomass Energy. Reference to Web Page
  Other Resources
    None available at this time.

Matrix Location: 12-I
Course: Hydrology
Topic: Environmental Topics
  Modules
    None available at this time.
  Case Studies
    Reference 32, Subpart O: Case Study – Methyl Bromide Alternative: Weyerhaeuser: Integrated Approaches to Developing Alternatives to Methyl Bromide. Reference to Web Page
Reference 32, Subpart P: Case Study – Methyl Bromide Alternative: Temperature Control for Stored Product Insects at Pillsbury. Reference to Web Page
Reference 32, Subpart Q: Case Study – Methyl Bromide Alternative: Structural Fumigation Using a Combined Treatment of Phosphine, Heat, and Carbon Dioxide. Reference to Web Page
Reference 32, Subpart R: Case Study – Methyl Bromide Alternative: Basamid for the Forest Nursery Industry. Reference to Web Page
Reference 32, Subpart Z: A Case Study of Environmental, Health and Safety Issues Involving the Burlington, Massachusetts Public School System: Sanitary Drains. Reference to Web Page
  Other Resources
    None available at this time.

Matrix Location: 12-L
Course: Water Resource Engineering
Topic: Environmental Topics
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 9, Subpart C: Wastewater Case Study. This case study looks at the health concerns of wastewater treatment plant workers. Reference to Hard Copy (Course Package)

Matrix Location: 13-F
Course: Environmental Engineering
Topic: Epidemiology and Toxicology
  Modules
    None available at this time.
  Case Studies
    Reference 9, Subpart F: New Bedford, Massachusetts Case Study. This case study deals with the PCB contamination of New Bedford Harbor and the Acushnet River estuary. Reference to Hard Copy (Course Package)
  Other Resources
    Reference 9, Subpart G: Example problems: Unit V Study Questions. Two questions ask for students’ views on the New Bedford case study. Reference to Hard Copy (Course Package)

Matrix Location: 13-L
Course: Water Resource Engineering
Topic: Epidemiology and Toxicology
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 9, Subpart A: Example problems: Unit II Study Questions. Two questions are provided to test knowledge of epidemiology fundamentals. Reference to Hard Copy (Course Package)
Reference 9, Subpart B: Example problems: Unit III Study Questions. Two questions are provided to allow students to comment on observations and quotes dealing with toxicology. Reference to Hard Copy (Course Package)

Matrix Location: 13-O
Course: Other
Topic: Epidemiology and Toxicology
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 22, Subpart E: Toxicology. Reference to Hard Copy (Workbook)
Reference 22, Subpart F: Occupational Medicine/Occupational Diseases. Reference to Hard Copy (Workbook)
Reference 24, Subpart F: Carcinogen Exposure in a Research Laboratory. Reference to Hard Copy (Book)

Matrix Location: 16-E
Course: Thermodynamics
Topic: Fires and Fire Suppression
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 18, Subpart I: Fatalities due to Fire. Reference to Web Page (Fatal Facts)

Matrix Location: 17-D
Course: Strength of Materials
Topic: Hazardous Material Use, Generation and Disposal
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart A: Safety Procedures. Reference to Hard Copy (Module)
Reference 3, Subpart H: Hazard Control. Reference to Hard Copy (Module)

Matrix Location: 17-E
Course: Thermodynamics
Topic: Hazardous Material Use, Generation and Disposal
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart A: Safety Procedures. Reference to Hard Copy (Module)
Reference 3, Subpart H: Hazard Control. Reference to Hard Copy (Module)

Matrix Location: 17-F
Course: Environmental Engineering
Topic: Hazardous Material Use, Generation and Disposal
  Modules
    None available at this time.
  Case Studies
    Reference 5, Subpart A: Case study: August 1985 Toxic Release at Union Carbide Facility at Institute, West Virginia. Reference to Hard Copy
  Other Resources
    None available at this time.

Matrix Location: 17-J
Course: Structural Analysis
Topic: Hazardous Material Use, Generation and Disposal
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart A: Safety Procedures. Reference to Hard Copy (Module)
Reference 3, Subpart H: Hazard Control. Reference to Hard Copy (Module)

Matrix Location: 17-N
Course: Seminar
Topic: Hazardous Material Use, Generation and Disposal
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart A: Safety Procedures. Reference to Hard Copy (Module)
Reference 3, Subpart H: Hazard Control. Reference to Hard Copy (Module)

Matrix Location: 20-E
Course: Thermodynamics/Heat Transfer
Topic: Heat/Cold Stress
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 22, Subpart Q: Thermal Environments. Reference to Hard Copy (Workbook)
Reference 27, Subpart F: Heat Exposure. Reference to Hard Copy (Workbook)
Reference 29, Subpart M: Thermal Conditions. Reference to Hard Copy (Useful Equations Book)

Matrix Location: 21-D
Course: Strength of Materials
Topic: Industrial Hygiene Fundementals
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart F: Introduction to Industrial Hygiene. Reference to Hard Copy (Module)

Matrix Location: 21-E
Course: Thermodynamics
Topic: Industrial Hygiene Fundementals
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 1, Subpart H: Example problem: Cotton Dust Sampling. Statistical values were calculated to determine if a vertical elutriator complies with a standard flow rate. Reference to Hard Copy (Article)
Reference 1, Subpart I: Example problem: Cotton Dust Sampling. Statistical values were used to find the range of the mean flow rate limits for cotton dust. Reference to Hard Copy (Article)
Reference 1, Subpart J: Example problem: Air Contaminants in an Industrial Operation. The flow rate of air traveling through an exhaust hood was determined. Reference to Hard Copy (Article)
Reference 3, Subpart F: Introduction to Industrial Hygiene. Reference to Hard Copy (Module)
Reference 4, Subpart A: Introduction and Discussion of Potential Foundry Hazards. Reference to Hard Copy (Packet)
Reference 4, Subpart B: Control Methods: Substitution and Isolation. Reference to Hard Copy (Packet)
Reference 6, Subpart A: Case study: Malathion. This case deals with occupational exposure to the commercially used pesticide Malathion. A table of the signs and symptoms associated with short-term exposures to Malathion is presented. Several control strategies are developed. Reference to Hard Copy (Packet)
Reference 6, Subpart B: Case study: Lead. Lead exposure and toxic effects are discussed. Practices to reduce lead exposure in the workplace are presented. Reference to Hard Copy (Packet)
Reference 6, Subpart C: Case study: Inorganic mercury. This case involves the effects of inorganic mercury on short-term memory. The effects of chronic exposure are discussed. Engineering controls are developed to minimize exposure. Reference to Hard Copy (Packet)

Matrix Location: 21-J
Course: Structural Analysis
Topic: Industrial Hygiene Fundementals
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart F: Introduction to Industrial Hygiene. Reference to Hard Copy (Module)

Matrix Location: 21-N
Course: Seminar
Topic: Industrial Hygiene Fundementals
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart F: Introduction to Industrial Hygiene. Reference to Hard Copy (Module)
Reference 22, Subpart A: Occupational Health Sciences-History and Objectives. Reference to Hard Copy (Workbook)

Matrix Location: 23-O
Course: Other
Topic: Maintainability
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 18, Subpart M: Fatalities due to poor equipment maintenance. Fatal Fact Number 45. Reference to Web Page (Fatal Facts)

Matrix Location: 26-N
Course: Seminar
Topic: Noise
  Modules
    None available at this time.
  Case Studies
    Reference 15, Subpart B: Case study: Physical Hazards. The use of engineering controls for physical hazards is discussed. Noise is emphasized. Reference to Hard Copy (Document based on Workshops)
  Other Resources
    None available at this time.

Matrix Location: 30-D
Course: Strength of Materials
Topic: Process Safety Management
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart E: Safety Principles for Laboratory Projects. Reference to Hard Copy (Module)

Matrix Location: 30-E
Course: Thermodynamics
Topic: Process Safety Management
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart E: Safety Principles for Laboratory Projects. Reference to Hard Copy (Module)

Matrix Location: 30-J
Course: Structural Analysis
Topic: Process Safety Management
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart E: Safety Principles for Laboratory Projects. Reference to Hard Copy (Module)
Reference 8, Subpart E: Example problems: Unit 4 Review Questions. Sixteen questions related to system safety and controls are presented. Reference to Hard Copy (Book)
Reference 8, Subpart H: Example problems: Unit 7 Review Questions. Fourteen questions relating to job-site safety and those responsible for administering such programs are presented. Reference to Hard Copy (Book)

Matrix Location: 30-N
Course: Seminar
Topic: Process Safety Management
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart E: Safety Principles for Laboratory Projects. Reference to Hard Copy (Module)
Reference 8, Subpart H: Example problems: Unit 7 Review Questions. Fourteen questions relating to job-site safety and those responsible for administering such programs are presented. Reference to Hard Copy (Book)

Matrix Location: 30-O
Course: Other
Topic: Process Safety Management
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 21, Subpart A: Lesson 1, Introduction and Definitions, Lesson Plan. Reference to Web Page
Reference 31, Subpart A: Manufacturing Bottom Line: Workers’ Compensation Costs Cut Dramatically. Reference to Hard Copy (Book)
Reference 31, Subpart F: Metal Manufacturing. Reference to Hard Copy (Book)

Matrix Location: 31-B
Course: Statics
Topic: Product Safety
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 5, Subpart C: Example problem: Biotechnology in Human Systems Design. This problem involves computing the center of gravity of a figure and determining if the figure is stable in several different configurations. Strain is also computed. Reference to Hard Copy (Module)

Matrix Location: 31-D
Course: Strength of Materials
Topic: Product Safety
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 5, Subpart C: Example problem: Biotechnology in Human Systems Design. This problem involves computing the center of gravity of a figure and determining if the figure is stable in several different configurations. Strain is also computed. Reference to Hard Copy (Module)

Matrix Location: 31-L
Course: Water Resource Engineering
Topic: Product Safety
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 1, Subpart Q: Example problem: Inherent Safety Example. Inherently safer alternate designs for a water treatment plant near a school were suggested. Reference to Hard Copy (Article)

Matrix Location: 33-M
Course: Design
Topic: Reliability
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 1, Subpart O: Example problem: Fault Tree. A fault tree was constructed for a pump, valve, and tank system. Reference to Hard Copy (Article)
Reference 1, Subpart P: Example problem: Variation on the Fault Tree Problem. A fault tree was constructed for a modified pump, valve, and tank system. Reference to Hard Copy (Article)
Reference 11, Subpart G: Example problems: Unit IX sample quiz questions. Ten questions regarding experiment preparation are found at the end of the unit. Topics include safety documentation, preliminary hazard analysis, failure modes and effect analysis, and fault tree analysis. Reference to Hard Copy (Module)

Matrix Location: 34-D
Course: Strength of Materials
Topic: Risk Management
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart C: Preparation for Laboratory Emergencies. Reference to Hard Copy (Module)
Reference 3, Subpart E: Safety Principles for Laboratory Projects. Reference to Hard Copy (Module)

Matrix Location: 34-E
Course: Thermodynamics
Topic: Risk Management
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart C: Preparation for Laboratory Emergencies. Reference to Hard Copy (Module)
Reference 3, Subpart E: Safety Principles for Laboratory Projects. Reference to Hard Copy (Module)

Matrix Location: 34-J
Course: Structural Analysis
Topic: Risk Management
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart C: Preparation for Laboratory Emergencies. Reference to Hard Copy (Module)
Reference 3, Subpart E: Safety Principles for Laboratory Projects. Reference to Hard Copy (Module)
Reference 8, Subpart C: Case study: Unit 2 Case Study. A worker on a mobile scaffold was being handed wooden braces on a windy day. He fell when the scaffold was knocked over. Questions emphasize accident cost accounting systems. Reference to Hard Copy (Book)
Reference 8, Subpart H: Example problems: Unit 7 Review Questions. Fourteen questions relating to job-site safety and those responsible for administering such programs are presented. Reference to Hard Copy (Book)

Matrix Location: 34-N
Course: Seminar
Topic: Risk Management
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart C: Preparation for Laboratory Emergencies. Reference to Hard Copy (Module)
Reference 3, Subpart E: Safety Principles for Laboratory Projects. Reference to Hard Copy (Module)
Reference 8, Subpart H: Example problems: Unit 7 Review Questions. Fourteen questions relating to job-site safety and those responsible for administering such programs are presented. Reference to Hard Copy (Book)

Matrix Location: 36-M
Course: Design
Topic: Safety Analysis Methodology
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 1, Subpart O: Example problem: Fault Tree. A fault tree was constructed for a pump, valve, and tank system. Reference to Hard Copy (Article)
Reference 1, Subpart P: Example problem: Variation on the Fault Tree Problem. A fault tree was constructed for a modified pump, valve, and tank system. Reference to Hard Copy (Article)
Reference 11, Subpart G: Example problems: Unit IX sample quiz questions. Ten questions regarding experiment preparation are found at the end of the unit. Topics include safety documentation, preliminary hazard analysis, failure modes and effect analysis, and fault tree analysis. Reference to Hard Copy (Module)
Reference 13, Subpart E: Example problems: Eight problems are found at the back of this module. These problems involve applying system safety techniques including fault tree analysis, preliminary hazard analysis, HAZOP, event tree analysis, “what if” analysis, and failure modes, effects, and criticality analysis. Reference to Hard Copy (Book)

Matrix Location: 38-B
Course: Statics
Topic: Safety Through Design
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 5, Subpart C: Example problem: Biotechnology in Human Systems Design. This problem involves computing the center of gravity of a figure and determining if the figure is stable in several different configurations. Strain is also computed. Reference to Hard Copy (Module)

Matrix Location: 38-D
Course: Strength of Materials
Topic: Safety Through Design
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart G: Experiment Preparation. Reference to Hard Copy (Module)
Reference 5, Subpart C:
Example problem: Biotechnology in Human Systems Design. This problem involves computing the center of gravity of a figure and determining if the figure is stable in several different configurations. Strain is also computed. Reference to Hard Copy (Module)

Matrix Location: 38-E
Course: Thermodynamics
Topic: Safety Through Design
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart G: Experiment Preparation. Reference to Hard Copy (Module)

Matrix Location: 38-J
Course: Structural Analysis
Topic: Safety Through Design
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart G: Experiment Preparation. Reference to Hard Copy (Module)

Matrix Location: 38-N
Course: Seminar
Topic: Safety Through Design
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 3, Subpart G: Experiment Preparation. Reference to Hard Copy (Module)

Matrix Location: 39-B
Course: Statics
Topic: Slips, Falls, Falling Objects and Other Impacts
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 18, Subpart J: Fatalities due to slips and falls, construction/demolition. Reference to Web Page (Fatal Facts)
Reference 18, Subpart K: Fatalities due to slips and falls. Reference to Web Page (Fatal Facts)
Reference 18, Subpart L: Fatalities due to falling objects. Reference to Web Page (Fatal Facts)

Matrix Location: 39-C
Course: Dynamics
Topic: Slips, Falls, Falling Objects and Other Impacts
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 18, Subpart J: Fatalities due to slips and falls, construction/demolition. Reference to Web Page (Fatal Facts)
Reference 18, Subpart K: Fatalities due to slips and falls. Reference to Web Page (Fatal Facts)

Matrix Location: 39-D
Course: Strength of Materials
Topic: Slips, Falls, Falling Objects and Other Impacts
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 18, Subpart G: Fatalities due to poor selection of materials. Reference to Web Page (Fatal Facts)
Reference 18, Subpart K: Fatalities due to slips and falls. Reference to Web Page (Fatal Facts)
Reference 18, Subpart L: Fatalities due to falling objects. Reference to Web Page (Fatal Facts)

Matrix Location: 39-J
Course: Structural Analysis
Topic: Slips, Falls, Falling Objects and Other Impacts
  Modules
    None available at this time.
  Case Studies
    Reference 8, Subpart C: Case study: Unit 2 Case Study. A worker on a mobile scaffold was being handed wooden braces on a windy day. He fell when the scaffold was knocked over. Questions emphasize accident cost accounting systems. Reference to Hard Copy (Book)
Reference 8, Subpart M: NIOSH Alert Case Study: “Request for Assistance in Preventing Worker Deaths and Injuries from Falls Through Sky Lights and Roof Openings.” A background, regulations, eight case reports, and recommendations are presented for the problem. Reference to Hard Copy (Book)
Reference 8, Subpart P: NIOSH Alert Case Study: “Request for Assistance in Preventing Worker Injuries and Deaths Caused by Falls from Suspension Scaffolds.” A background, current and proposed OSHA regulations, five case reports, conclusions, and recommendations are presented. Reference to Hard Copy (Book)
  Other Resources
    None available at this time.

Matrix Location: 42-O
Course: Other
Topic: Vision
  Modules
    None available at this time.
  Case Studies
    None available at this time.
  Other Resources
    Reference 32, Subpart V: A Case Study of Environmental, Health and Safety Issues Involving the Burlington, Massachusetts Public School System: Lasers. Referencce to Web Page