| Matrix
Location: 2-G Course: Thermodynamics/Heat Transfer Topic: Anthropometry |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 33, Subpart E: Biothermodynamics and Bioenergetics. Reference to Hard Copy (Book) | ||
| Matrix
Location: 2-J Course: Other Topic: Anthropometry |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 33, Subpart
D: Bioelectricity and Bioelectronics. Reference
to Hard Copy (Book) Reference 33, Subpart F: Ergonomic Biodynamics. Reference to Hard Copy (Book) Reference 33, Subpart G: Quantitative Workload Analysis. Reference to Hard Copy (Book) Reference 33, Subpart H: Neuromuscular Control Systems. Reference to Hard Copy (Book) |
||
| Matrix
Location: 3-G Course: Thermodynamics/Heat Transfer Topic: Chemical Mixing |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 3, Subpart
B: General Laboratory Safety Rules. Reference
to Hard Copy (Book) Reference 11, Subpart A: Example problems: Unit III sample quiz questions. These five questions are designed to emphasize the reading regarding safety procedures and programs. Reference to Hard Copy (Module) |
||
| Matrix
Location: 3-H Course: Design Topic: Chemical Mixing |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 3, Subpart
B: General Laboratory Safety Rules. Reference
to Hard Copy (Book) Reference 11, Subpart A: Example problems: Unit III sample quiz questions. These five questions are designed to emphasize the reading regarding safety procedures and programs. Reference to Hard Copy (Module) |
||
| Matrix
Location: 4-G Course: Thermodynamics/Heat Transfer Topic: Codes and Standards |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 3, Subpart D: Safety and Health Standards and Regulations. Reference to Hard Copy (Book) | ||
| Matrix
Location: 4-H Course: Design Topic: Codes and Standards |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 14, Subpart D: Example problems: “Unit IV sample quiz questions.” Standards, codes, and the organizations that create these standards are the focus of this set of questions. Engineering ethics is also touched upon. Reference to Hard Copy (Book) | ||
| Matrix
Location: 4-I Course: Seminar Topic: Codes and Standards |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| Reference 32, Subpart
EE: Printed Wiring Board Case Study 1: Pollution Prevention Work
Practices. Reference to Web Page Reference 32, Subpart FF: Printed Wiring Board Case Study 2: On-Site Etchant Regeneration. Reference to Web Page Reference 32, Subpart GG: Printed Wiring Board Case Study 3: Opportunities for Acid Recovery and Management. Reference to Web Page Reference 32, Subpart HH: Printed Wiring Board Case Study 4: Plasma Desmear: A Case Study. Reference to Web Page Reference 32, Subpart II: Printed Wiring Board Case Study 5: A Continuous-Flow System for Reusing Microetchant. Reference to Web Page Reference 32, Subpart JJ: Printed Wiring Board Case Study 6: Pollution Prevention Beyond Regulated Materials. Reference to Web Page Reference 32, Subpart KK: Printed Wiring Board Case Study 7: Identifying Objectives for Your Environmental Management Systems Materials. Reference to Web Page Reference 32, Subpart LL: Printed Wiring Board Case Study 8: Building and Environental Management System: H-R Industries’ Experience. Reference to Web Page |
||
| Other Resources | ||
| None available at this time. | ||
| Matrix
Location: 6-J Course: Other Topic: Confined Space |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 18, Subpart F: Fatalities during confined space entry. Fatal Fact Number: 25, 36, 39. Reference to Web Page (Fatal Facts) | ||
| Matrix
Location: 7-A Course: Introduction to Electrical Engineering Topic: Construction Safety |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 18, Subpart A: Electrocutions during construction. Reference to Web Page (Fatal Facts) | ||
| Matrix
Location: 7-I Course: Seminar Topic: Construction Safety |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 18, Subpart A: Electrocutions during construction. Reference to Web Page (Fatal Facts) | ||
| Matrix
Location: 7-J Course: Other Topic: Construction Safety |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 18, Subpart A: Electrocutions during construction. Reference to Web Page (Fatal Facts) | ||
| Matrix
Location: 8-H Course: Design Topic: Control/Display Design |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 30, Subpart
A: The Typewriter: A Case History in the Evolution of Design. Reference
to Hard Copy (Book) Reference 30, Subpart B: The Faucet: A Case History of Design Difficulties. Reference to Hard Copy (Book) |
||
| Matrix
Location: 11-A Course: Introduction to Electrical Engineering Topic: Electrical Hazards |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 1, Subpart
N: Example problem: Current Paths. The current flow through a person
was determined for when the person was holding an energized circular saw
case, non-grounded. Reference to Hard Copy
(Article) Reference 14, Subpart A: Example problems: “Unit I sample quiz questions.” Basic safety and electrical concepts are tested. Reference to Hard Copy (Book) Reference 18, Subpart A: Electrocutions during construction. Reference to Web Page (Fatal Facts) Reference 18, Subpart B: Electrocutions during Ground Core sampling. Reference to Web Page (Fatal Facts) Reference 18, Subpart C: Electrocutions during Power Line work. Reference to Web Page (Fatal Facts) Reference 18, Subpart D: Electrocutions during Electrical Maintenance. Reference to Web Page (Fatal Facts) |
||
| Matrix
Location: 11-I Course: Seminar Topic: Electriccal Hazards |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 18, Subpart
A: Electrocutions during construction. Reference
to Web Page (Fatal Facts) Reference 18, Subpart B: Electrocutions during Ground Core sampling. Reference to Web Page (Fatal Facts) Reference 18, Subpart C: Electrocutions during Power Line work. Reference to Web Page (Fatal Facts) Reference 18, Subpart D: Electrocutions during Electrical Maintenance. Reference to Web Page (Fatal Facts) |
||
| Matrix
Location: 11-J Course: Other Topic: Electrical Hazards |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 18, Subpart
A: Electrocutions during construction. Reference
to Web Page (Fatal Facts) Reference 18, Subpart B: Electrocutions during Ground Core sampling. Reference to Web Page (Fatal Facts) Reference 18, Subpart C: Electrocutions during Power Line work. Reference to Web Page (Fatal Facts) Reference 18, Subpart D: Electrocutions during Electrical Maintenance. Reference to Web Page (Fatal Facts) |
||
| Matrix
Location: 13-J Course: Other Topic: Epidemiology and Toxicology |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 22, Subpart
E: Toxicology. Reference to Hard
Copy (Workbook) Reference 22, Subpart F: Occupational Medicine/Occupational Diseases. Reference to Hard Copy (Workbook) Reference 24, Subpart F: Carcinogen Exposure in a Research Laboratory. Reference to Hard Copy (Book) |
||
| Matrix
Location: 16-G Course: Thermodynamics/Heat Transfer Topic: Fires and Fire Suppression |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 3, Subpart
A: Safety Procedures. Reference
to Hard Copy (Module) Reference 18, Subpart I: Fatalities due to Fire. Reference to Web Page (Fatal Facts) |
||
| Matrix
Location: 17-G Course: Thermodynamics/Heat Transfer Topic: Hazardous Material Use, Generation and Disposal |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 3, Subpart
A: Safety Procedures. Reference
to Hard Copy (Module) Reference 3, Subpart H: Hazard Control. Reference to Hard Copy (Module) |
||
| Matrix
Location: 20-G Course: Thermodynamics/Heat Transfer Topic: Heat/Cold Stress |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 22, Subpart
Q: Thermal Environments. Reference
to Hard Copy (Workbook) Reference 27, Subpart F: Heat Exposure. Reference to Hard Copy (Workbook) Reference 29, Subpart M: Thermal Conditions. Reference to Hard Copy (Useful Equations Book) |
||
| Matrix
Location: 21-G Course: Thermodynamics/Heat Transfer Topic: Industrial Hygiene Fundementals |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 3, Subpart F: Introduction to Industrial Hygiene. Reference to Hard Copy (Module) | ||
| Matrix
Location: 23-J Course: Other Topic: Maintainability |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 18, Subpart M: Fatalities due to poor equipment maintenance. Fatal Fact Number 45. Reference to Web Page (Fatal Facts) | ||
| Matrix
Location: 30-B Course: Lab Instrumentation and Measurement Topic: Process Safety Management |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 3, Subpart E: Safety Principles for Laboratory Projects. Reference to Hard Copy (Module) | ||
| Matrix
Location: 30-G Course: Thermodynamics/Heat Transfer Topic: Process Safety Management |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 3, Subpart E: Safety Principles for Laboratory Projects. Reference to Hard Copy (Module) | ||
| Matrix
Location: 30-J Course: Other Topic: Process Safety Management |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 21, Subpart
A: Lesson 1, Introduction and Definitions, Lesson Plan.
Reference
to Web Page Reference 31, Subpart A: Manufacturing Bottom Line: Workers’ Compensation Costs Cut Dramatically. Reference to Hard Copy (Book) Reference 31, Subpart F: Metal Manufacturing. Reference to Hard Copy (Book) |
||
| Matrix
Location: 34-B Course: Lab Instrumentation and Measurement Topic: Risk Management |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 3, Subpart E: Safety Principles for Laboratory Projects. Reference to Hard Copy (Module) | ||
| Matrix
Location: 34-G Course: Thermodynamics/Heat Transfer Topic: Risk Management |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 3, Subpart
C: Preparation for Laboratory Emergencies. Reference
to Hard Copy (Module) Reference 3, Subpart E: Safety Principles for Laboratory Projects. Reference to Hard Copy (Module) |
||
| Matrix
Location: 38-G Course: Thermodynamics/Heat Transfer Topic: Safety Through Design |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 3, Subpart G: Experiment Preparation. Reference to Hard Copy (Module) | ||
| Matrix
Location: 42-J Course: Other Topic: Vision |
||
| Modules | ||
| None available at this time. | ||
| Case Studies | ||
| None available at this time. | ||
| Other Resources | ||
| Reference 32, Subpart V: A Case Study of Environmental, Health and Safety Issues Involving the Burlington, Massachusetts Public School System: Lasers. Reference to Web Page | ||