| Defense Date |
Name |
Dissertation Title |
| 08/02/2006 |
Colton, Mark Bryan |
Reality-Based Modeling of Nonlinear Passive Devices for Haptic Simulations |
| 11/01/2006 |
Zhu, Xiaorui |
Dynamic Motion Control for Compliant Framed Wheeled Modular Mobile Robots |
| 04/18/2006 |
Jayal, Anshu Dhar |
An Experimental Investigation of the Effects of Cutting Fluid Application on Machining Performance |
| 11/30/2006 |
States, David Nile |
Optimizing Adhesive Joint Design by Elicudating the Effects of Subtle Geometric Changes |
| 05/02/2006 |
Kingston, David O. |
Drag on Nonspherical, Nonisometric Fuel Particles in Stoker Fired Boilers |
| 01/16/2006 |
Lee, Sung Kyu |
Development of a Microinjection Molding Test Bed (MIMTB) to Study the Thermo Transport Behavior of Polymer in Micro-Scale |
| 05/01/2007 |
Leelavanichkul, Seubpong |
Helicoidal Morphology in Engineering Structures |
| Defense Date |
Name |
Dissertation Title |
| 07/19/2006 |
Grow, David Isaac |
Harness Design for Two-Axis Torso Haptics |
| 09/03/2005 |
Pol, Suhas U. |
Sensitivity of Urban Street Canyon Flow Characters to Upper-Level Wind Conditions |
| 03/24/2006 |
Srinath, Vinay |
Composite Crack Growth and Rubber Elasticity in Material Point Method |
| 5/03/2006 |
Whiteside, Michelle Lee |
Design of a Frame Mounted Gearbox for Bicycles |
| 12/17/2004 |
Gharpure, Siddarth S. |
Failure Mechanisms of Stitched Sandwich Composited Under Interlaminar Loading |
| 5/09/2006 |
Butterfield, Jared Michael |
Damage Tolerance of Stitched Carbon Composite Sandwich Structures |
| 03/10/2006 |
Rodriguez, Juan Carlos |
Efficacy of the Utah Ergo Analyzer at Various Frame Rates |
| 05/12/2006 |
Burst, Nicholas E. |
Investigating the Thin-Film Versus Bulk Material Properties of Structural Adhesives |
| 08/21/2006 |
Nielsen, Matthew K. |
Evaluation of the V-Notched Rail Shear Test For Use With Course Textile Composites |
| 08/21/2006 |
Storer, Micah |
Failure Analysis of a Composite Cylinder Dome Interface |
| 01/06/2006 |
Vuong, Muoi (Ten) V. |
J-Integral Characterization of Linear Viscoelastic Particulate Composite Materials |
| 05/26/2006 |
Omer, Thomas B. |
Low Chord Reynolds Number Propeller-Influenced Aerodynamics |
| 11/13/2006 |
Fershtut, Ari B. |
On the Reynolds Number Dependence of Passive Contaminant Motions in the Viscous Sublayer |
| 05/01/2006 |
Joshi, Ruchika U. |
A Data Management and Analysis Webservice for Experimental Fluid Dynamics |
| 04/26/2006 |
Goodro, Robert M. |
Independent Effects of Mach Number and Reynolds Number on Impingement Heat Transfer |
| 05/01/2006 |
Hellstrand, K. Andreas |
Development of a High-Capacity Dual Feed Drum Magazine for 0.499 Caliber Ammunition for M-4 and M-16 Rifles |
| 11/20/2006 |
Bhawalkar, Anup Satish |
The Mechnical Threshold Stress Plasticity Model for 6061-T6 Aluminum Alloy and its Numerical Validation |
| 01/11/2006 |
Vongole, Ravi Narasimha Rao |
Parametric Study of the Thermal Effects Associated with the Liga Exposure Process |
| 03/02/2007 |
Kim, Jongwon |
Stability Analysis of Quadruped Trotting Robots |
| 01/24/2007 |
Webb, Nicholas Jason |
An Initial Mechanical and Environmental Assessment of Multifunctional Sandwich Composites for Space Applications |
| 12/09/2006 |
Yarger, Cody B. |
An Initial Assessment of Multifunctional Sandwich Composite Concepts for Spacecraft Applications |
| 08/23/2005 |
Gupta, Ashutosh Kumar |
Development of a Low-Cost Three-Dimensional Digital Scanner |
| 12/01/2006 |
Pohlman, Paul M. |
Design and Testing of a Labview ™ Based Controller for a Full-Sized Prototype of a Self-Balancing Wheelchair |
| 04/26/2007 |
Duangmuan, Passakorn |
Development of a Nanopositioning System |
| Defense Date |
Name |
Dissertation Title |
| 09/30/2005 |
Arriscorreta Cabello, Carlos A. |
A Statistical Factorial Predictive Model for the Corrosion Fatigue
of Aluminum Alloy 7075-T6 Under Acidic Conditions |
| 11/30/2001 |
Bharvirkar, Manish |
Thermo-Mechanical Analysis of Fused Deposition Acrylonitrile-Butadiene-Styrene
Parts |
| 03/10/2006 |
Cooley, Daniel C. |
Identification of Three-Dimensional Specific Absorption Rate and Blood
Perfusion for Modeling and Control of Thermal Therapies |
| 05/13/2005 |
Merrell, Clinton Roy |
Instrumentation and Algorithms for Posture Estimation
in Compliant Framed Modular Mobile Robotic Systems |
| 12/20/2005 |
Miner, Heidi |
The Effect of Atmospheric Stability and Local Source Conditions on
Ground Level Plume Dispersion Through a Compact Barrel Array |
| 03/08/2006 |
Quist, Steven Matthew |
Methodology for Designing a Compliant Ceramic to Metal
Seal |
| 02/01/2006 |
Reading, Matthew |
An Estimate of Percent Maximum Effort Using Handgrip Strength and Perceived
Exertion |
| 11/30/2005 |
Singh, Vaneet |
Coefficient of Friction Measurement for Hip Prostheses
Loaded During Stance and Swing Phases of Gait |
| 12/17/2004 |
Vader, Mark Henry |
Fixation Strength of Augmented Unicortical Anterior Vertebral Body
Screws |
| 12/17/2004 |
Merrell, Clinton Roy |
Coefficient of Friction Measurement for Hip Prostheses
Loaded During Stance and Swing Phases of Gait |
| Defense Date |
Name |
Dissertation Title |
| 4/7/2004 |
Cann, Michael T. |
Effect of Part-Tool Interaction on Cure Distortion of Flat Composite Laminates |
| 10/14/2004 |
Devashish |
Development and Evaluation of Tissue Convective Energy Balance Equation |
| 12/10/2004 |
Cheng, Kung-Shan |
Fundamentals of Treatment Strategy and Treatment Time Minimization for Thermal Treatment of Tumors |
| 12/10/2004 |
Cheng, Kung-Shan |
Fundamentals of Treatment Strategy and Treatment Time Minimization for Thermal Treatment of Tumors |
| 3/22/2005 |
Chang-Yen, David |
Multiphysical Microsensor Design |
| 3/22/2005 |
Oktem, Sinan |
The Effect of Boundary Conditions on the Response of Laminated Thick Composite Plates and Shells |
| 4/1/2005 |
Shinde, Sachin R. |
A Study of Fretting Fatigue Damage Transition to Cracking in 7075-T6 Aluminum Alloy |
| 5/3/2005 |
Kantak, Ameya Sudhir |
Microscale Cyclical Electrical Field Flow Fractionation |
| 5/26/2005 |
Blanchard, Daniel |
Model Based Control Of Magnetic Resonance-Guided Thermal Treatments: Theory And Experimental Evaluation |
| 6/23/2005 |
Arora, Dhiraj |
Model Based Control Of Magnetic Resonance-Guided Thermal Treatments: Theory And Experimental Evaluation |
| 10/19/2005 |
Christensen, Robert |
Speckle Reduction for Ultrahigh Resolution Laser Projectors |
| Defense Date |
Name |
Dissertation Title |
| 1/20/2004 |
Wait, Jonathon B. |
On the Downstream Evolution of Laminar Initial Conditions Shear-Wake Flows |
| 5/3/2004 |
Miles, Scott Aaron |
Characterization of Flow Phenomena Associated with the Cold Restart of a Pipeline Filled with Gelled Waxy Oil |
| 12/2/2004 |
Singh, Parampal |
Experimental and Numerical Investigation on Performance of Angle-Stitched Sandwich Structures |
| 12/3/2004 |
Arnim, Nathan |
Measurements of High Reynolds Number Boundary Layer Turbulence Perturbed by an Intermediate Scale Hemisphere Wake |
| 12/10/2004 |
Huilgol, Naveen |
Ultrasonic Microforging for Production of Microscale Parts |
| 12/14/2004 |
Subramanian, Rajesh |
Integration of Coordinate Measuring Machine and Vision System for Automated Datum Alignment |
| 12/18/2004 |
Costaschuk, Daniel |
Pressure Measurements in Rectangular Microchannels |
| 12/23/2004 |
Singh, Balwinder |
Testing and Development of a Fast Response Lagrangian Dispersion Models |
| 1/5/2005 |
Perry, Trent |
Use of Magnetic Resonance Thermometry for Focused Ultrasound Specific Absorption Rate Estimation |
| 2/8/2005 |
Chacon, Adrian |
Non Thesis |
| 2/23/2005 |
Oktem, Mehmet |
Pit Morphology an Effect of Prior Pitting Corrosion on Fatigue Life in 7075-T6 and 7075-T6 Extruded Aluminum Alloys |
| 3/24/2005 |
Ellerbeck, Nickolas S. |
Characterization of Sandwich Composites for Automotive Applications |
| 4/25/2005 |
Cowley, Jason |
Analysis of Adhesive Degradation Due to Repeated Repair Cures at Elevated Temperatures |
| 4/25/2005 |
Hoskere, Shreyas P. |
Conceptual Machine Design Simplification Modeler for Rapid Machine Design |
| 5/2/2005 |
Zhang, Qiang |
Aerodynamic Performance of Transonic and Subsonic Airfoils: Effects of Surface Roughness, Turbulence Intensity, Mach Number, and Streamline Curvature-Airfoil Shape |
| 5/3/2005 |
Lin, Yu-Chiang |
Project |
| 5/9/2005 |
Hansen, Bradley |
Non Thesis |
| 5/12/2005 |
Rapp, Vi |
Reinstatement and Validation of a Supersonic Wind Tunnel |
| 5/13/2005 |
Parker, Craig |
Energetic and Biomechanical Comparisons of Treadmill Slope Display Using Tilt Versus Torso Forces |
| 5/16/2005 |
Van Otten, Austin |
Energy Absorption Characteristics of Automotive Composite Sandwich Structures |
| 5/24/2005 |
Merrill, Robert |
Non Thesis |
| 6/13/2005 |
Sandberg, Donald L. |
Influence of Mach Number and Freestream Turbulence Intensity on the Aerodynamic Losses of a Turbine Vane |
| 6/29/2005 |
Whitman, Zachary |
Improvement in Energy Absorption Through Use of Bistable Structures |
| 6/29/2005 |
Whitman, Zachary Layne |
Improvement in Energy Absorption Through Use of Bistable Structures |
| 7/6/2005 |
Sorensen, Christopher |
Non Thesis |
| 7/15/2005 |
Ramamurthy, Prathap |
Spatial & Temporal Variability of Turbulence in An Urban Street Canyon |
| 8/2/2005 |
Challa, Dhanalakshmi |
On the Downstream Evolution of Turbulent Inflow Shear Wake Flows |
| 8/4/2005 |
Badardeen, Aju |
Optical Sensing of Gaseous Oxygen Using Fluorescence Quenching of an Electrostatically Assembled, Oxygen Sensitive Dye |
| 8/16/2005 |
Rich, Jason Kenneth |
In-Situ Stitch Stiffness of Delaminated Composite Materials |
| 8/23/2005 |
Xiao, Nian |
Microtube Heat Transfer with Second-Order Slip Flow and Temperature Jump Boundary Conditions |
| 9/1/2005 |
Bowers, Trebor Adem |
Momentum and Heat Transfer of Surfaces with Three-Dimensional, Irregular Roughness at Low Roughness Reynolds Numbers |
| 10/14/2005 |
Bagal, Nilesh L. |
Development and Testing of Empirical Parameterization for Quic Urban and Industrial Complex Model |
| 11/1/2005 |
Sachidanandam, Ambalavanan |
Multimaterial Heat Conduction Using Direct and Subgrid Models |
| 11/14/2005 |
Richins, Mark Simmons |
Ultrasonic, Nondestructive Evaluation of Microscopic Scratches |
| 12/8/2005 |
Young, Nathaniel |
Design of a Universal Belay Device |
| 12/14/2005 |
Rakwal, Dinesh R. |
Theory, Analysis and Design of Sperical Aerostatic Bearings |
| n/a |
Srivastava, Gautam |
Project |
