Results Page for Individual Wiki Report
| Date: 29 November 2006 |
|
Table of Contents |
 |  |
| Author: Dan Oakeson | Team: Solar Car |
Final Selection and Support
With the requirement of turning radius of 6 meters, the turning centers needed to be calculated to assure the rack and pinion can produce enough linear travel to achieve this. Below is the sketches of the turning center:
The solar car has a 20.5 degrees turning angle, which will be adequate to make the 6 meter turning radius requirement. The rack selected will produce enough linear travel to turn the 20.5 degrees need to make the turn.
Assembly Drawing
An image of the final rack and pinion can be seen below.
Figure 6: Final Assembly
Return to Report Approach Page
Continue to Report Lessons Learned Page
Top of Page
Report Summary Page
Page last modified on December 03, 2006, at 07:38 PM