December 05, 2006, at 03:43 PM
by JustinMcKinnon -
Changed lines 36-38 from:
to:
Deleted lines 57-59:
December 05, 2006, at 03:42 PM
by JustinMcKinnon -
Changed line 3 from:
to:
December 05, 2006, at 03:41 PM
by JustinMcKinnon -
Changed line 1 from:
to:
December 05, 2006, at 03:40 PM
by JustinMcKinnon -
Changed line 1 from:
to:
December 05, 2006, at 03:40 PM
by JustinMcKinnon -
Changed line 4 from:
to:
December 05, 2006, at 03:39 PM
by JustinMcKinnon -
Deleted line 2:
Deleted line 3:
Changed lines 55-58 from:
Link to ME 4000 Main/HomePage
to:
Link to ME 4000 Main/HomePage
December 05, 2006, at 01:30 PM
by DJBurton -
Added line 4:
Added line 6:
December 05, 2006, at 01:36 AM
by JustinMcKinnon -
Changed line 4 from:
to:
December 05, 2006, at 01:34 AM
by JustinMcKinnon -
Changed lines 3-4 from:
to:
December 04, 2006, at 04:49 PM
by JasonEngland -
Changed lines 2-5 from:
to:
December 03, 2006, at 04:00 PM
by JustinMcKinnon -
Changed line 1 from:
to:
November 14, 2006, at 09:56 AM
by JasonEngland -
Changed lines 36-37 from:
to:
November 13, 2006, at 04:49 PM
by JustinMcKinnon -
Changed lines 31-32 from:
to:
November 01, 2006, at 08:22 AM
by DJBurton -
Changed lines 44-45 from:
to:
October 17, 2006, at 05:11 PM
by JustinMcKinnon -
Changed lines 34-35 from:
to:
October 17, 2006, at 12:54 PM
by JasonEngland -
Changed lines 30-32 from:
to:
October 10, 2006, at 03:31 PM
by DJBurton -
Changed lines 40-41 from:
to:
October 04, 2006, at 02:15 PM
by JasonEngland -
Changed lines 31-32 from:
to:
October 04, 2006, at 02:14 PM
by JasonEngland -
Added lines 31-32:
October 04, 2006, at 02:13 PM
by JasonEngland -
Changed lines 29-30 from:
to:
October 04, 2006, at 02:11 PM
by JasonEngland -
Changed lines 29-30 from:
to:
October 03, 2006, at 11:51 AM
by JutPrince -
Changed lines 37-38 from:
to:
October 03, 2006, at 11:50 AM
by JutPrince -
Changed lines 37-38 from:
to:
October 02, 2006, at 02:25 PM
by JasonEngland -
Changed lines 29-30 from:
to:
October 02, 2006, at 02:24 PM
by JasonEngland -
Changed lines 29-30 from:
to:
October 02, 2006, at 02:23 PM
by JasonEngland -
Changed lines 29-30 from:
to:
October 02, 2006, at 02:22 PM
by JasonEngland -
Changed lines 29-30 from:
to:
September 25, 2006, at 02:04 PM
by DJBurton -
Changed lines 35-36 from:
to:
September 18, 2006, at 10:34 PM
by DJBurton -
Changed lines 34-35 from:
to:
September 18, 2006, at 11:11 AM
by JasonEngland -
Changed line 27 from:
to:
September 18, 2006, at 11:08 AM
by JasonEngland -
Changed line 27 from:
to:
September 15, 2006, at 12:50 PM
by JutPrince -
Changed lines 10-11 from:
to:
September 15, 2006, at 10:32 AM
by JasonEngland -
Added lines 37-38:
Link to ME 4000 Main/HomePage
September 13, 2006, at 04:13 PM
by JasonEngland -
Changed lines 18-21 from:
The company EFI Electronics, a brand of Schneider Electric, is a design, manufacturing, and testing facility that builds surge suppression devices for various applications. One of their products, the T-40w, is designed to protect a building from electrical surges. These buildings, usually large buildings, have a 3 phase power system and can contain massive amounts of power running through them.
While building the T-40w product, a test is completed to make sure that it will take an electrical surge and ground it, without damaging the building that it will protect. The current test involves an operator going step by step through testing each phase, including full-power-up. This is time consuming and can involve operator error.
to:
The company EFI Electronics, a brand of Schneider Electric, is a design, manufacturing, and testing facility that builds surge suppression devices for various applications. One of their products, the Titan-40w, is designed to protect a building from electrical surges. These buildings, usually large buildings, have a 3 phase power system and can contain massive amounts of power running through them.
While building the Titan-40w product, a test is completed to make sure that it will take an electrical surge and ground it, without damaging the building that it will protect. The current test involves an operator going step by step through testing each phase, including full-power-up. This is time consuming and can involve operator error.
September 12, 2006, at 05:40 PM
by JustinMcKinnon -
Changed line 26 from:
to:
September 12, 2006, at 05:39 PM
by JustinMcKinnon -
Added line 26:
September 11, 2006, at 10:22 PM
by DJBurton -
Changed lines 26-27 from:
to:
Changed lines 30-32 from:
to:
September 11, 2006, at 10:16 PM
by DJBurton -
Changed lines 31-32 from:
to:
September 08, 2006, at 10:56 AM
by JasonEngland -
Changed lines 4-5 from:
to:
Added line 7:
Changed lines 9-10 from:
to:
September 04, 2006, at 07:11 PM
by DJBurton -
Changed lines 25-28 from:
to:
September 04, 2006, at 07:09 PM
by DJBurton -
Changed lines 27-28 from:
to:
September 04, 2006, at 07:07 PM
by DJBurton -
Added lines 25-28:
August 29, 2006, at 03:42 PM
by DJBurton -
Changed lines 23-24 from:
to:
August 29, 2006, at 03:37 PM
by DJBurton -
Added lines 23-24:
August 28, 2006, at 05:53 PM
by JustinMcKinnon -
Changed lines 1-2 from:
to:
Changed line 4 from:
to:
August 28, 2006, at 05:43 PM
by JustinMcKinnon -
Changed lines 1-2 from:
to:
August 28, 2006, at 05:31 PM
by JustinMcKinnon -
Changed lines 24-25 from:
*your picture must be a gif or jpeg & must be under 200KB or it will not upload
to:
August 28, 2006, at 11:53 AM
by JustinMcKinnon -
Changed lines 1-3 from:
to:
August 28, 2006, at 11:03 AM
by JustinMcKinnon -
Changed lines 1-8 from:
Put the info for your group’s homepage here (i.e., what you need to do for the first part of HW#1, also summarized below).
To create a SideBar for your group, follow the instructions on the Sample page in the sidebar to your left.
Create a group logo and upload it into the space in the upper left of this page.
to:
August 25, 2006, at 12:05 PM
by JustinMcKinnon -
Changed lines 5-6 from:
Create a group logo and upload it into the space in the upper left of this page.
to:
Create a group logo and upload it into the space in the upper left of this page.
\\
August 25, 2006, at 12:03 PM
by JustinMcKinnon -
Changed lines 6-7 from:
to:
August 25, 2006, at 11:43 AM
by JustinMcKinnon -
Changed line 8 from:
Team T-40w
to:
Team T-40w
August 25, 2006, at 11:43 AM
by JustinMcKinnon -
Changed line 8 from:
Team T-40w
to:
Team T-40w
Added line 13:
August 25, 2006, at 11:42 AM
by JustinMcKinnon -
Changed lines 7-11 from:
To create user pages in this group that are based on the page that you already completed in ME3910, place the wikiNames of your group members on this page. Then, once you’ve saved this page, you will note a ? mark next to their WikiName. Click their WikiName to be prompted to create their page. When you do this place the following line of text in the edit window:
(:include profiles.WikiName :)
And replace WikiName with your WikiName
to:
August 25, 2006, at 11:37 AM
by JustinMcKinnon -
Changed lines 12-13 from:
to:
Team T-40w
- DJBurton
- JasonEngland
- JustinMcKinnon
August 25, 2006, at 11:32 AM
by JustinMcKinnon -
Changed lines 15-16 from:
- no more than 3 sentences.
to:
- Automate Surge-Protection Testing Assembly
- Redesign Testing Enviroment
- Incorporate RFID Technology
Changed lines 20-21 from:
to:
The company EFI Electronics, a brand of Schneider Electric, is a design, manufacturing, and testing facility that builds surge suppression devices for various applications. One of their products, the T-40w, is designed to protect a building from electrical surges. These buildings, usually large buildings, have a 3 phase power system and can contain massive amounts of power running through them.
While building the T-40w product, a test is completed to make sure that it will take an electrical surge and ground it, without damaging the building that it will protect. The current test involves an operator going step by step through testing each phase, including full-power-up. This is time consuming and can involve operator error.
The goal for the project is to redesign the test procedure and fixture so that it can be completely automated. This will eliminate operator error as well as create more time for the operator to continue building the product. The test fixture will also record results and notify the operator of the results of the test.
The next step of the project will be to incorporate the results of the test into a quality control system. This can be done either by saving the results to a memory file or by attaching them directly to the product. The group will evaluate these different methods and decide how best to incorporate these results.
August 24, 2006, at 03:34 PM
by SamTA -
Added lines 1-22:
Put the info for your group’s homepage here (i.e., what you need to do for the first part of HW#1, also summarized below).
To create a SideBar for your group, follow the instructions on the Sample page in the sidebar to your left.
Create a group logo and upload it into the space in the upper left of this page.
To create user pages in this group that are based on the page that you already completed in ME3910, place the wikiNames of your group members on this page. Then, once you’ve saved this page, you will note a ? mark next to their WikiName. Click their WikiName to be prompted to create their page. When you do this place the following line of text in the edit window:
(:include profiles.WikiName :)
And replace WikiName with your WikiName
Problem Statement
- no more than 3 sentences.
Project Summary
Group Picture
*your picture must be a gif or jpeg & must be under 200KB or it will not upload
