Results Page for Individual Wiki Report
| Date: 29 November 2006 |
|
Table of Contents |
|
 |  |
| Author: Paulo Botero | Team: Solar Car |
Final Selection and Support
With the top two designs, another design matrix was used to help narrow down the final design. This matrix used different weight factors that allowed for a bigger gap between scores. Once the final design was selected, proe was used to create a 3D drawing of the parts with the correct dimensions and tolerances. These parts were made into engineering drawings that where used for the manufacturing process. Bellow is a picture of the final design assembly and part.
Figure 6: Braket
Figure 7: Brake Assembly
Figure 8: Pivot Point
Figure 8: Pivot Point
Return to Report Summary Page
Continue to Report Lessons Learned Page
Page last modified on November 30, 2006, at 09:04 AM