Approval Process Note
You MUST complete this form prior to the approval. Clicking on each subheading will open that portion of the form. The work authorization will not progress past the pending approval state until this is processed.

RECHARGE CENTER - 3D Printer - Waterject - SEM

Submitter Information

PI/Approving Contact

Accounting Contact

Account Information

TOOLS

Please provide general size and description of your project above. ABOUT TOOL: Dimension SST 1200es 3-D Printer/Rapid Prototyping Machine: -- 10” x 10” x 12” build envelope -- Layer thickness: 0.33 mm (0.013 in.) or .254 mm (.010 in.) -- Fused Deposition Model (FDM) technology: “thermoplastic filament that is melted down and extruded from a print head.” -- ABS thermoplastic material
Please provide general size and description of your project above. ABOUT TOOL: Objet Eden 260 V 3-D Printer/Rapid Prototyping Machine -- 10” x 9.9” x 7.9” build envelope -- Resolution: X and Y = 600 dpi; Z = 1,600 dpi; horizontal build layers as fine as 16 microns (0.0006 in.) -- Polyjet technology, not FDM: “a carriage jets photopolymers onto the work space, which are then cured by a UV light. After a thin layer is created, the process repeats itself by jetting additional layers until the part is fully formed.” -- Greater variety of materials (subject to availability)
Maximum upload size: 209.72MB
As the buyer, you will supply all materials for your project. Please provide the general size and description of project in the above space. ABOUT TOOL: Omax 2626 Abrasive Water Jet Cutting Machine: -- X-Y Cutting Envelope 2’ 5” x 2’ 2” -- Z-Axis Travel 8” -- Table Size (L x W) 3’ 10” x 2’ 7”
Maximum upload size: 209.72MB
ABOUT TOOL: Hitachi S-2600N Scanning Electron Microscope (SEM): -- Dual mode: a) high vacuum and b) variable pressure (1 to 270 Pa) -- Detectors: secondary electrons and backscattered electrons -- Secondary electron image resolution 4.0 nm (high vacuum mode) -- Backscattered electron image resolution 5.0 nm (variable pressure mode) -- Magnification: 15x to 300,000x (mfg. info.)
Sending
RECHARGE CENTER - Fast-Capture Camera

Submitter Information

PI/Approving Contact

Accounting Contact

Account Information

Ultra-High Speed Camera (Shimadzu HPVX2)

-- Up to 10Mfps capture rate -- 128 or 256 images -- Resolution 400 x 250 pixels (0.1 Mega Pixel) -- Monochromatic -- TTL pulse triggering . If you have questions please contact Professor Kingstedt : o.kinstedt@utah.edu

Important Process Note --You MUST enter at least one authorized user even if that individual is listed above.

Authorized Individuals

Sending